1. Home
  2. Guides
Cost guide

Driveway cost in Glasgow

A driveway in Glasgow costs approximately £45 to £190 per square metre installed, depending on the surface material, the depth of the sub-base and the drainage solution required.

Cost

Last reviewed 8 August 2026

James Kirkland, Planning & Dropped Kerb Lead

Written by James Kirkland, Planning & Dropped Kerb Lead

What does a driveway cost per square metre in Glasgow?

Material choice sets the price band, and ground conditions set the position within that band.

The figures below cover excavation, a compacted sub-base, edge restraints and the surface itself. They exclude dropped kerb works, retaining walls and significant level changes.

SurfaceIndicative supply and lay, per m²Typical 40m² driveway
Gravel over membrane£45 – £70£1,800 – £2,800
Tarmac (asphalt)£55 – £90£2,200 – £3,600
Concrete (brushed or printed)£70 – £130£2,800 – £5,200
Block paving (standard concrete block)£80 – £130£3,200 – £5,200
Block paving (natural stone setts)£120 – £190£4,800 – £7,600
Resin-bound over new base£100 – £160£4,000 – £6,400

Prices are indicative for Greater Glasgow and change with material and haulage costs. Every quote is confirmed after a site measure.

What is included in a driveway quote?

A complete driveway quote itemises excavation, disposal, sub-base, drainage, edging, surface and reinstatement.

  • Excavation to formation level, typically 200mm to 350mm depending on surface and ground
  • Removal and licensed disposal of spoil, charged by tonne or skip
  • Type 1 MOT sub-base, laid and compacted in layers
  • Laying course, edge restraints and haunching
  • Surface material and jointing or finishing
  • Surface water management: linear drainage, soakaway or permeable build-up
  • Reinstatement of grass, borders and any disturbed footpath

Which extra costs change a Glasgow driveway price?

Access, ground conditions, levels and kerb works are the four costs that move a quote most.

  • Dropped kerb (vehicle crossing): a separate Glasgow City Council application plus construction of the crossing
  • Poor ground: soft or made ground needs a deeper sub-base or geotextile stabilisation
  • Slopes and levels: retaining walls, steps and extra drainage on Glasgow's many sloping plots
  • Restricted access: tenement and terraced access can force barrow runs instead of machine work
  • Existing surface: breaking out concrete costs more to remove than lifting gravel
  • Drainage compliance: a soakaway or permeable surface adds cost but usually avoids a planning application

Which driveway material gives the best value in Glasgow?

Block paving gives the best balance of cost, repairability and resale appeal in the Glasgow climate.

Individual blocks can be lifted and relaid, which matters when utilities need access or when a single area settles. Resin-bound costs more up front and gives a seamless permeable finish. Tarmac is the cheapest large-area surface but is harder to repair invisibly.

Frequently asked questions

Everything you need to know

A typical 40m² Glasgow driveway costs roughly £1,800 for gravel, £3,200 to £5,200 for block paving and £4,000 to £6,400 for resin-bound, including excavation and sub-base.

Get a fixed-price driveway quote for your Glasgow property

Send your measurements, or ask us to measure on site. We quote by material, sub-base build-up and drainage solution, so you can compare like with like.